Emc-Compliant Wiring - Pilz PSSu K F EI CV Operating Manual

Wiring
–
Please note:
Track /Z must remain free
6.7

EMC-compliant wiring

EMC-compliant wiring for connecting an encoder
To avoid EMC interference we recommend that the shield on the sensor lines is only con-
nected to earth at a single point:
A or B
Conductor loops outside the shield must be avoided.
The shield must run continuously from the sensor to the evaluation device.
Operating Manual PSSu K F EI CV(-T)
1004290-EN-04
Hiperface (A,/A,B,/B) + HTL single ended (A as Z)
Encoder
U
Encoder
B
Mini-IO
X31
51