The Snmp Tools Screen - Cabletron Systems HubSTACK SEHI-34 User Manual

LOCAL MANAGEMENT
Exiting the Trap Table Screen
1. To exit the Trap Table screen, press the appropriate Function key.
To exit to the Feature Selection screen, use the arrow keys to
highlight the RETURN command.
2. Press the Return key. The Feature Selection screen appears.

6.3.4 The SNMP Tools Screen

This section describes how you can use the SNMP Tools screen to
access Management Information Bases (MIBs). Access to screen
options depends on the access status accorded to your community
name. This section describes Super-User management capabilities.
SNMP Tools allows you access to valuable MIB information. You can
get information about specific object identifiers (OIDs), edit the values
of configurable OIDs, and request the OID numerically sequential to
the originally requested OID.
Other ways to view OIDs from the SNMP Tools screen include
Walking, Stepping, and Cycling. Walk and Cycle let you review several
OIDs at a time.
To access the SNMP Tools screen from the Features Selection screen,
use the arrow keys to highlight the SNMP Tools Support option,
then press the Return key or F9. The SNMP Tools screen shown in
Figure 6-7 appears.
Page 6-16