Console Cable Configuration - Cabletron Systems HubSTACK SEHI-34 User Manual

6.1.1 Console Cable Configuration
Use the RJ45 Cable Kit provided with the SEHI-ACCY-KIT package
to attach the management terminal to the SEHI's COM port as shown
in Figure 6-1.
Connect the console cable to the SEHI as follows:
1. Attach the male RJ45 connector to the COM port of the SEHI.
2. Attach the female end (25-pin or 9-pin, as applicable) to the COMM
port on the terminal.
HubSTACK
SEHI-24
CONSOLE CABLE
COM PORT
Figure 6-1. Management Terminal Connection
10BASE-T HUB LANVIEW®
WITH
COM
COM RJ45 PORT
LOCAL MANAGEMENT
EPIM-2
EPIM-1
MANAGEMENT TERMINAL
Page 6-3