Finishing The Installation - Cabletron Systems HubSTACK SEHI-34 User Manual

CONNECTING TO THE NETWORK
ON Position
(Toward Back
of EPIM)

4.2 FINISHING THE INSTALLATION

The SEHI is now ready for operation. Before placing the network into
service, test the installation thoroughly, making sure that you can
address all stations and that the SEHI and all stations are indicating
normal operation. Ensure that the networking software is configured
properly to match the installed network. If you encounter errors or
abnormal operation, proceed to Chapter 5, Troubleshooting.
Page 4-12
OFF Position
(Toward Front
of EPIM)
Figure 4-7. The EPIM-X