Figure 73 Dynamic Ip Configuration; Figure 74 Network Service Configuration - idp SOLID Series User Manual

If you setup network automatically,
please choose DHCP.
 Please select DHCP or Static.
 "DHCP" is default for SOLID-310 printer.
 Please enter values for "IP", "Network
Mask", and "Gateway". Click "Set
Configuration".
 Static IP is recommended. DHCP server
assigns IP address automatically but
this IP address is temporary, so the IP
address may be changed. In this case,
the network error may occur in
connecting to SOLID-310 network
printer.
 If you are not aware of static IP, please
ask network administrator for Static IP.

We recommend using Static IP because
it is more stable for using SOLID-310
network printer.
You can change Service
Configuration.

SOLID-310 network printer provides 3
kinds of service (change "USB Spool",
"Network Spool" and "Network SDK").
You can select and change the service
according to the need.
 In "Network SDK", you can control the
printer and print a card well, and the
printer supports SSL (Secure Sockets
Layer) and User Authentication for
security.

Please use default and ask technician
for details.

Figure 73 Dynamic IP configuration

Figure 74 Network service configuration

49