Download Print this page

Gps Antenna - Racelogic VBOX II User Manual

Hide thumbs Also See for VBOX II:

Advertisement

become intermittent.
The VB20SL must only be used with the supplied antenna, unless instructed otherwise by Racelogic.

GPS Antenna

The GPS Antennas supplied with the VB20SL are 3.5 V active antennas. For the best possible signal quality, it is
important to maintain a clean connection between the antennas and the VBOX. Before fixing the antennas to the VBOX,
ensure that there are no dust particles in either connector. Replacement antennas are available by contacting your
VBOX distributor.
The antenna is a magnetic mounting type for quick and simple mounting to the vehicle roof. For optimum GPS signal
reception, make sure that the antenna is fitted to the highest point of the vehicle away from any obstructions that may
block satellite reception. The GPS antenna works best with a metal ground plane underneath (eg. Vehicle roof).
Please also note that when using any GPS equipment, a clear sky view is important. Objects in the surrounding area
such as tall buildings or trees can block the GPS signal causing a reduction in the number of satellites being tracked, or
introducing reflected signals that can decrease the accuracy of the system.
NOTE: VB20SL can struggle with maintaining an RTK lock required for Slip and Pitch measurement if the antennas are
placed too close to Roof Bars. If a poor mounting position cannot be avoided then use Ground plane antennas,
RLVBACS065.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II_Range/VBOX_II_User_Guide/06_-
_VBOX_20SL_Dual_Antenna_Placement
28

Advertisement

loading

This manual is also suitable for:

Vbox iisxVbox 20slVbox 20sl3Vb2Vb2sxVb20sl ... Show all