Racelogic VBOX II User Manual page 34

Velocity can be output on either the Analogue or Digital outputs.
See the table below for the GPS data available with each antenna configuration.
Antenna
Sats
combinations
A
A+B
A+C
A+B+C
Antenna Vertical
combinations Velocity
A
A+B
A+C
A+B+C
The VB20SL3 has a brake trigger input so not only can the VB20SL3 measure and output Velocity it can measure and
output Trigger Velocity, Trigger to zero Time and Trigger to zero Distance. This data is logged to SD card and available
on the CAN bus or USB/serial connection bus along with all the other GPS data.
NOTE: When measuring a braking distance the GPS optimisation must be set to High and the Kalman filter
Velocity parameter set to 0 (zero), via the front panel controls or the VBOX Tools software.
Time Latitude
True
Slip Angle
Heading
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II_Range/VBOX_II_User_Guide/07_-
Longitude Velocity
Pitch
Yaw rate
Angle
_VBOX_20SL3_Triple_Antenna_Placement
Heading Height
Lateral
Roll Angle
Velocity
34