Racelogic VBOX II User Manual page 3

Main Menu
SETTINGS
COLDSTART
MODE
SETUP ANTENNAS
SMOOTHING
OUTPUTS
EXIT
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_II_Range/VBOX_II_User_Guide/01_-_VBOX_II_Front_Panel
Press '■' to enter the VBOX general settings menu.
Press '■' to perform a GPS cold start
Press '■' to change the mode of operation between
VBOX module mode and Stand Alone mode. Then
press '■' to confirm.
Press '■' to enter the antenna configurations menu. This
menu contains separate sub-menus for pitch antenna
and roll antenna pairs
Press '■' to edit the smoothing levels of the Lat acc and
Long acc channels, and also Slip, Pitch, Roll, channels
on SL units only.
Press '■' ' configure the digital and analogue outputs.
Press '■' to exit the setup menu and cause the settings
to be saved in EEPROM
3