Table of Contents
Advertisement
Move heat shrinkable tubing to the fusion point, which must be in the middle. Then, place
heat shrinkable tubing in the middle of the heating furnace. The heater begins heating as
soon as heating furnace closed. About 34 seconds later, heating shrinking has been
completed. The figure below is the heat shrink tubing before thermal shrinkage and after
thermal shrinkage.
Cooling
The heat shrinkable tubing after heating at in a high temperature, and need cooling. Hang the
cooling tray on the carrying handle. So, after heating, pull out the fiber from the heating
furnace to the cooling tray by hands. About 1 minute later, it cools to the ordinary temperature.
Menu instruction
The machine adopts METRO-style menu, whose interface is simple, beautiful and
convenience for operation. The operation interface has 8 icons, and each icon corresponds
to a different functional menu.
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7
PICTURE 16
FIGURE 3.7
FIGURE 4.1
FIGURE 4.1
14
Advertisement
Table of Contents
