Maintenance - Artic FUSION SPLICER 5.7 Operation Manual

Software upgrade
This function is used to upgrade software in the machine. After the U disk with upgrade file inserted
into USB port, choose this option and press the key to upgrade. As shown in Figure 4.12, program
begins upgrading. Attention that after upgraded, users need to boot.

Maintenance

The Maintenance menu consists of Electrodes Aging, Motor Checking, Fusion Records, Arc Numbers,
etc, as shown in Figure 4.13.
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7
FIGURE 4.12
FIGURE 4.13
22