Technical Parameters - Artic FUSION SPLICER 5.7 Operation Manual

Technical parameters
Fitted fiber
Cladding diameter
Coating diameter
Typical loss
Echo loss
Cutting length
Program
Operation mode
Auto to heat
Splice time
Heating time
Magnification
Observation mode
Fusion Records
Estimate loss
Tension
Operation Interface
Battery capacity
Power supply
Electrodes times
Interface
Operation Environment
Volume/weight
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7
SM， MM， DS， NZDS
80 -150um
100 - 1000um
SM:<=0.02dB; MM:<=0.01dB;
DS:<=0.04dB; NZDS:<= 0.04dB
> 60dB
10-16mm(Coating layer Diameter: <250µm)
16mm(Coating layer Diameter: 250~1000µm)
40 groups
Auto mode and Manual mode
Supported
7 seconds
30 seconds(heat-shrinking tube width is 40mm or 60mm)
150 times/double show,300 times/single show
A high sensitivity CMOS sensor, Color LCD of 5.6 inch with pixels 640x480
Support to store 4000 groups of Fusion Records
Supported
Supported,2N
GUI
10.8Ah;Typical 220 times fusion; Show remaining real-time
Adapter : AC100-240V(50/60HZ); Output : DC11~13.5V
4000 times Interface
12V DC power input,USB2.0
Altitude: 0-5000m; Humidity: 0-95%; Temp: -10℃- +50℃; Air speed: <=15m/s
160mm （L） ×150mm （W） ×145mm （H） /2.8kg(Battery Included)
8