Function - Artic FUSION SPLICER 5.7 Operation Manual

Camera brightness
Press the key to enter the interface of camera brightness, as shown below
Press the key or to modify the gain of CMOS camera resulting in the change of camera
brightness. Press the key to switch the CMOS camera sensor between X and Y.
Tension
Open the option, splice completed, the machine would impose 2 Newtonʼs pulling on the fiber to
test the quality of splicing. If the fiber broke, it means the fusion failed. Press the key to switch the
tension state between ON and OFF.
Auto shutdown
When the option is turned on, the machine will shut down automatically if no operation within ten
minutes.

Function

The function menu lists the splicing the machine with some features, such as time and date, motor
test, export splicing records, program upgrade, etc. as shown in Figure 4.8.
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7
FIGURE 4.7
19