Cooling; Menu Instruction - Artic FUSION SPLICER 4.3 User Manual

Move heat shrinkable tubing to the fusion point, which must be in the middle. Then, place
heat shrinkable tubing in the middle of the heating furnace. The heater begins heating as
soon as the heating furnace closed. About 34 seconds later, heating shrinking has been completed.
The figure below is the heat shrink tubing before thermal shrinkage and after thermal shrinkage.
3.6. Cooling
The heat shrinkable tubing after heating is at a higt temperature, and needs cooling. Hang the
cooling tray on the carrying handle. So, after heating, pull out the fiber from the heating
furnace to the cooling tray by hands. About 1 minute later, it cools to the ordinary
temperature.

4. Menu instruction

4. Menu instruction
The machine adopts a METRO-style menu, whose interface is simple, beautiful and
convenient for operation. The operation interface has 8 icons, and each icon corresponds
to a different functional menu.
PICTURE 16
FIGURE 3.7 FIGURE 3.7
FIGURE 4.1 FIGURE 4.1
USER MANUAL HANDHELD FTTX FUSION SPLICER FUSION SPLICER 4.3 USER MANUAL HANDHELD FTTX FUSION SPLICER FUSION SPLICER 4.3
13