A Complete Splice; Power On; Preparation Of Fiber End Face - Artic FUSION SPLICER 5.7 Operation Manual

A complete splice

A full fiber splice procedure including: the fiber end face preparation, fiber splicing, tension
test, heating and cooling of shrink tube. This chapter will introduce details of the specific
process of the fiber splice.
Power on
Press and hold the power button until the power indicator light, then, LCD also enter the
self-test screen.
Preparation of fiber end face
Prepare two optical fibers, as shown in Figure 3.2, in which an optical fiber is set into the heat
shrink tube.
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7
FIGURE 3.1
FIGURE 3.2
10