Artic FUSION SPLICER 5.7 Operation Manual page 21

Motor Test
Motor test imitates the distance of the push motor moving forward in the fusion process. Press the
key to enter the interface. After the prepared fiber clamped into the machine, you must press the
key to run the test. The test results will be given at the end of the test, as shown in Figure 4.10,
which shows the distance of each push motor moving forward.
Export Records
The option is used to export the fusion records memories in the machine. After the U disk inserted
into the USB port, choose this option and press the key to confirm fusion records export. The
program begins to test the USB port and then find the records. If thereʼs no record, program will
prompt error.
FIGURE 4.11
21
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7