Notice before using
Safety instruction
Please read the following information before first using.
1. Using the specified battery and adaptor, otherwise it may cause an explosion or permanent
damage to the machine.
2. Don't use the machine in a high temperature, flammable or explosive environment (such
as a gas station nearby).
3. Don't attempt to disassemble the machine or its accessories, only authorized agencies can
repair it.
4. Please don't touch electrodes during working time, or it may cause personal injury.
5. When liquid or foreign body into the machine, or smoke, odor, noise, etc., or a strong
impact, please immediately shut down the machine, and pull out the AC power.
Note
When using the machine, improper operation may cause damage to the machine or even
danger for human health. It is suggested to operate in the following way.
1. This type of the machine is only used for splicing quartz glass fiber, not in place of any other
matter.
2. Don't use or store the machine in a high temperature or humidity environment (otherwise
it may damage the equipment or cause the machine performance degradation).
3. While using the machine in a dust environment, try to avoid dust as far as possible.
4. When moving the machine from low temperature to a high temperature, there should be
any heating process to eliminate condensation.
5. Please use a high-purity anhydrous alcohol (purity>99%) to clean magnifying lens, reflector
and fiber v-groove surface.
6. The splicing the machine must be handled gently to avoid strong vibration or impact, and
with carrying case for transportation or storage.
7. Maintain the whole the machine once a year.
Legal statement
Without the written consent of our company, any unit or individual will not be allowed to
extract or copy part of the contents of this manual, or transmitted in any form.
Products described in this manual, including our company software, unless approved by the
related oblige, otherwise no one can be in any form for the software to copy, distribute,
modify, excerpts, decompiling, disassembling, decryption, reverse engineering, lease, transfer,
sublicense and other ACTS of infringing the software copyright.
Attention: The manual describes some features and functions of the product and its acces-
sories, related to the production batch, therefore, the description in this manual may not
exactly match the product you purchased, as well as its accessories.
3
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7