Artic FUSION SPLICER 5.7 Operation Manual page 5

Table
1 Power
4 Up
7 Right
10 Reset
Key functions
Table
While Power On, press this key to shut down.
While Power OFF, press this key to Power On.
Under the standby interface, press this key to discharge a weak arc.
In menu, press this key to enter the next submenu.
If permitted, press this key to run.
If permitted, press this key to switch between the left and right sides of CMOS
Sensor, Motors and so on.
Under the standby interface, press this key to enter the main menu.
Under the main menu interface, press this key to return the upper menu.
Under the standby interface, press this key to increase the LCD backlight.
In the CMOS sensor step, press this key to increase the CMOS sensor backlight.
In motor adjustment, press this key to drive up the fiber.
If permitted, press this key to move up the cursor.
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7
2 Enter
5 Left
8 Heat
11 Switch Video
3 Menu / Exit
6 Down
9 Arc
12 Auto Splice
5