Artic FUSION SPLICER 5.7 Operation Manual page 23

Electrodes aging
New electrode discharge instability and the need for the discharge of a certain number of times to
stabilize the arc which called electrode aging.
When electrode replaced, enter this menu and then press the key to start aging the electrode, as
shown in Figure 4.14. Donʼt open windproof cover in aging process.
FIGURE 4.14
Motor checking
Motor checking is used to check the motor performance and change the motor position. Total of 4
motors are available for operation.
23
OPERATION MANUAL OUTDOOR MULTIFUNCTION FUSION SPLICER FUSION SPLICER 5.7