A Complete Splice; Power On; Preparation Of Fiber End Face - Artic FUSION SPLICER 4.3 User Manual

3. A complete splice

A full fiber splice procedure including: the fiber end face preparation, fiber splicing, tension
test, heating and cooling of shrink tube. This chapter will introduce details of the specific
process of the fiber splice.
3.1. Power on
Press and hold the power button until the power indicator light, then, LCD also enters the
self-test screen.
3.2. Preparation of fiber end face
Prepare two optical fibers, as shown in Figure 3.2, in which an optical fiber is set into the heat
shrink tube.
FIGURE 3.1
FIGURE 3.2
USER MANUAL HANDHELD FTTX FUSION SPLICER FUSION SPLICER 4.3
9