Normal System Operation
6.8
Setting field offset
manually, step-by-
step
Setting the Field Offset Manually
The field offset is used to move the original AB line to a new desired location. This
will be used most often if the base station has been moved. The field offset can be
manually set or automatically set. This section describes the manual setting.
1. From the main steering screen, press
2. Turn the main dial to select Settings, and then press
3. Use the main dial to select Guidance, and then press
4. Use the main dial to select Field Offset. The current offset is shown on the right
side of the screen. Press
5. Use
or the main dial to set a new field
offset.
mojoRTK
to change the field offset.
to enter the main menu.
.
.
Field Offset
1.00m
S_mojoRTK_047
94