Setting Waypoints (Or A-B Points) - Leica mojoRTK User Manual

6.2
General informa-
tion
Setting waypoints,
step-by-step
Normal System Operation

Setting Waypoints (or A-B Points)

The waypoints are used to define a line in the field that all working lines will be
parallel to. Waypoints need to be set before auto-steer can be used.
Before you can set waypoints, the system must have a good position fix. If
auto-steer is not engaged and the system has a good position fix, the
Auto-steer Ready LED will be lit.
1. Position your vehicle in the field where you want to start (Waypoint A).
2. Press twice to enter the setup for
Waypoint A. Press
press to cancel.
3. Drive to your desired ending point in the field (Waypoint B).
to set Waypoint A or
mojoRTK
Press
[OK] to set
point A
S_mojoRTK_024
85