Mojortk Console Installation; Before Installation - Leica mojoRTK User Manual

System Installation
2.3
2.3.1

Before installation

mojoRTK Console Installation

Before Installation
• You should also refer to the installation hints specific to your tractor type or
steer kit if applicable. These can be obtained from our website at
www.mojoRTK.com or may have been supplied with your system.
• The make and model of your vehicle will determine how you complete each of
the following tasks.
Before the console is installed, you must do the following:
1. Check or prepare for console power connection:
Depending on the vehicle type, you may already have the correct connectors to
plug into the unit. Otherwise, you will have to use the plugs supplied and hook
them up to the vehicle wiring per the console connection diagram. Refer to
mojoRTK console, rear side, page 18. Please contact Leica Geosystems or your
local reseller for more information.
2. Check or prepare for console speaker connections:
Again, depending on vehicle type, you may already have the correct connectors
to plug into the unit. Otherwise you will have to use the plugs supplied and hook
them up to the vehicle wiring per the console connection diagram. Refer to
mojoRTK console, rear side, page 18. Please contact Leica Geosystems or your
local reseller for more information.
mojoRTK 32