Leica mojoRTK User Manual page 111

Required items
Unlock codes
Wayline storage -
mojoRTK
Normal System Operation
• Unlock code to unlock the Wayline Storage feature on the mojoRTK base station
and console.
Please contact Leica Geosystems or your local reseller for further details on activating
this optional software module.
For information about installing the unlock codes refer to "B.1 Unlock Codes".
Storing a wayline, step-by-step
1. Switch on the mojoRTK console and wait for a good position fix to be achieved
(red light will turn on).
2. If you are not on the navigation screen then press
3. Press twice to enter the Wayline wizard.
4. If you wish to save the current wayline then press
wayline first then set an AB (or A-Heading) line using the procedures described
in "6.2 Setting Waypoints (or A-B Points)". After setting the wayline you will be
prompted to save the wayline.
mojoRTK
until it comes up.
. If you wish to set a new
111