Leica mojoRTK User Manual page 101

Normal System Operation
6. Press to enter the Base Channel Wizard.
7. Use the main dial to scroll through the different options. Select Network RTK and
then press .
8. You will be prompted to enter the following details:
• Host/Server IP address
• Host/Server port
• Username
• Password
They will be supplied by your Network RTK provider when you create an account
with them.
9. After entering the above details the mojoRTK console will attempt to connect to
the selected source. If any problems occur an appropriate message will be
displayed.
10. Once the console successfully contacts the Network RTK server you will be
prompted to select a stream to use.
11. A stream represents a combination of correction format and base location. Select
the closest stream with a compatible reference format.
mojoRTK 101