Leica mojoRTK User Manual page 123

Logging NMEA Data
to a USB Drive
Normal System Operation
To enable compatibility mode:
1. Switch on the mojoRTK console and from the Navigation screen press
enter the main menu.
2. Use the main dial to select Settings -> Extended Features -> NMEA settings.
3. Select Compatibility Mode, and then press
The NMEA output can be logged to a USB drive for post processing of the data. This
can be useful for mapping where a vehicle has been or determining the slope of a
field. Refer to "B.3 Formatting USB Flash Drives" for important information about
using USB drives with the mojoRTK products.
To enable logging of NMEA data:
1. Switch on the mojoRTK console and from the Navigation screen press
enter the main menu.
2. Use the main dial to select Settings -> Extended Features -> NMEA settings.
3. Select Log NMEA to USB, and then press
Once NMEA logging has been turned on the NMEA sentences are logged to the USB
stick as they appear out the serial port. The NMEA data is logged to a file named
nmea_log.txt in the root directory of the USB drive.
mojoRTK
to toggle compatibility mode.
to toggle the logging functionality.
to
to
123