Leica mojoRTK User Manual page 117

Normal System Operation
Loading stored base station positions, step-by-step
1. Switch on the mojoRTK base station and insert a USB stick containing either a
base positions backup (from a mojoRTK base station) or a wayline backup (from
a mojoRTK console).
2. Use to select Settings, and then press
3. Use to select Saved Positions, and then press
4. Use to select Import Position, and then press
5. You will be asked to confirm that you wish to import the positions. The imported
positions will be added to the currently stored locations. However, if one of the
new positions is within 10m of an already stored location then the older location
will be removed.
6. If you wish to cancel then press
Press to proceed with importing the positions.
7. A message will then be displayed indicating if the import was successful.
.
mojoRTK
.
.
.
117