Setting The Line Spacing - Leica mojoRTK User Manual

6.3
General informa-
tion
Setting line
spacing, step-by-
step
Normal System Operation

Setting the Line Spacing

The line spacing sets how far apart the working lines are. This distance is essentially
the width of the implement you are using.
1. From the main navigation screen, press
Line Spacing by pressing
2. If measurement is correct as it is, press
3. Use or the main dial to set the line
spacing according to the measured implement
width - from end tool to end tool.
Once you have set the whole units to the desired
value press , this will then allow you to
change the fractional units (after the decimal
point).
4. Press to confirm the new setting.
.
mojoRTK
to enter the main menu and select
.
Line Spacing
12 .00m
S_mojoRTK_027
87