Running the mojoRTK Console for the
First Time
4
4.1
Set up the console
Running the mojoRTK Console for the First Time
Setting up the mojoRTK Console
Before starting the mojoRTK console in the tractor:
•
Have the base station set up and running with a fixed position as described in
chapter "3 mojoRTK Base Station Operation".
•
Note the channel number that the base station is running on (by default this is
channel 0).
1. Press and hold
will turn on and the Leica logo screen will come
up.
2. Press
to continue.
mojoRTK
for 2-3 seconds and the unit
Introduction
Welcome to the
mojoRTK Setup Wizard
Press Ok to continue
Ok
S mojoRTK 001
60