Setting The Implement Offset - Leica mojoRTK User Manual

Normal System Operation
6.4
General informa-
tion
Setting implement
offset, step-by-
step

Setting the Implement Offset

The implement offset is used when the center of the implement is not in line with
the center of the vehicle. It is used to adjust the vehicle paths for offset implements.
1. From the main steering screen, press
2. Turn the main dial to select Settings, and then press
3. Use the main dial to select Guidance, and then press
4. Use the main dial to select Implement Offset. The current offset is shown on
the right side of the screen. Press
5. Use or the main dial to set a new
implement offset.
mojoRTK
to change the implement offset.
to enter the main menu.
.
.
Implement Offset
10
Right
S_mojoRTK_029
88
.00m