Wayline Storage - Leica mojoRTK User Manual

Normal System Operation
6.14
Description
Benefits
Limitations

Wayline Storage

This is an optional software upgrade to the base model in all regions.
• Unlocking the wayline storage feature allows the user to save and recall up to
100 stored waylines.
• The stored waylines can be transferred between mojoRTK consoles using a USB
stick. Refer to "B.3 Formatting USB Flash Drives" for important information about
using USB drives with the mojoRTK products.
Using Wayline Storage removes the need for the user to continually redo the setting
of their wayline when working with multiple waylines.
• For repeatability the base station must be placed in exactly the same position as
when the wayline was set. To avoid incorrect recall of waylines only the waylines
set with the base station in the current position will be available for recall. If the
base station has been moved at all and not replaced in exactly the same spot
then use of the mojo feature may be required.
• The base position is stored on the mojoRTK console with each wayline and this
is used to filter which waylines are available for recall. If the current base station
position is not the same as the associated base station position for a desired
wayline then the wayline will not be available. The base station position for the
desired wayline can be backed up from the mojoRTK console and loaded into the
base station.
mojoRTK 110