Software Upgrade - Leica mojoRTK User Manual

mojoRTK Base Station Operation
3.2.6

Software upgrade,

step-by-step
Software Upgrade
When performing a software upgrade, ensure that the batteries are
charged and the base station is connected to external power. It is vitally
important that the device is not turned off during an upgrade.
Refer to "B.3 Formatting USB Flash Drives" for important information about
using USB drives with the mojoRTK products.
, scroll to Service and press
1. Using
2. Using , scroll to Software Upgrade and press
3. Insert the USB stick containing the new software into the USB port.
4. Press to select the software version displayed. If the USB stick contains
multiple software versions, select the desired version.
5. The current and new software versions will be displayed. Press
A software upgrade consists of a number of steps that will be displayed on
the screen including Checking, Erasing, Installing, Power Down, and
Loading. This will take a few minutes.
6. If a software upgrade is not your choice, press
screen.
mojoRTK
.
.
until you return to the main
54
to proceed.