Huawei FusionModule5000 Product Description page 75

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
Item
Power input
Power output
System memory
Solid state disk
FE port expansion
RS485 serial port
expansion
AI/DI expansion
(RJ45)
DO expansion
(RJ45)
Wireless
communication
3G
USB
Button
Specifications
⚫ Supports two AC inputs
⚫ Rated voltage; 200–240 V AC/100–120 V AC
⚫ rated frequency; 50 Hz/60 Hz
⚫ Input current; 6.7 A
⚫ rated voltage: 53.5 V DC
⚫ Output power of two power supplies: 2000 W (176–300 V AC);
940 W (linear derating at 85–175 V AC)
⚫ Output power of a single power supply: 1000 W (176–300 V
AC); 470 W (linear derating at 85–175 V AC)
⚫ Output current: 14 A
512 MB
2 GB and 128 MB of storage space
Supports two WAN ports, two LAN ports, and 10/100M
communications rate
⚫ Four RS485 ports with the default communications rate of 9600
bit/s
⚫ Each port provides 12 V DC power with the rated current of 450
mA.
⚫ Supports six AI/DI ports to connect to smoke sensors, water
sensors, and temperature sensors.
⚫ Each port provides 12 V DC power with the rated current of 85
mA.
⚫ Supports two expansion dry contacts with contact point capacity
of 20 W, maximum withstand voltage of 60 V DC, and rated
current of 0.5 A.
⚫ Supports the active DO port with an output voltage of 12 V DC
and output current of 450 mA.
Supports wireless communication that complies with
IEEE802.15.4.
Supports 3G (WCDMA) communication and is compatible with 2G
(GSM) communication. A standard SIM card slot is provided.
NOTE
The prerequisite for using a SIM card is that the site has signal coverage.
Provides a general USB port.
⚫ SW: wireless network pairing button
⚫ Default: restores the default IP address
68