Huawei FusionModule5000 Product Description page 57

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
Indicator
ALM
PWR
Networking Switch
Table 3-26 Networking switch description
Name
Button pressing
Button pressing
Button holding down
Default Button
Table 3-27 Default button description
Name
Color Meaning
Red Alarm indicator Steady
Green Power indicator Steady
⚫ If an indicator blinks at long intervals, it is blinking at 0.5 Hz, that is, on for 1s and then off for 1s.
⚫
If an indicator blinks at short intervals, it is blinking at 4 Hz, that is, on for 0.125s and then off for
0.125s.
⚫
If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.
⚫ Blinking intermittently at super short intervals means an indicator blinks at super short intervals for
0.5s and then remains off for 0.5s.
Definition
Press the button for
less than 1s.
Press and hold the
button for more than
1s but less than 5s.
Press and hold the
button for more than
10s but less than 20s.
Definition
Status Description
The actual
on number of
online devices is
less than the
value of BIM
number.
Off The actual
number of
online devices
equals the value
of BIM number.
Board power
on indicator.
Function
CIM blinking function
Creates a network if no network has
been created. Switches between network
organization and data transmission if a
network has been created.
Clears the current network (including
the network parameters of all the online
BIMs).
Function
Measure
Check the value
of BIM number,
the BIM cable
connection, and
the BIM
indicators.
Requires no
handling.
Requires no
handling.
50