Huawei FusionModule5000 Product Description page 105

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
Item
WiFi function
PoE port
Reset button
WPS button
Indicators
Table 3-66 describes the indicators on the WiFi converter.
Table 3-66 WiFi converter indicators
Indicat
or
RUN
ALM
WiFi
WPS
Specifications
⚫ 2.4 GHz frequency, two antennas, supporting eight STA connections,
50 m WiFi coverage (no blockage)
⚫ Support the WPS button
One PoE port, complying with IEEE802.3AT, 25.5 W
Press and hold down the button for more than 5s to restore the factory
settings of the WiFi converter.
Support fast WiFi access by WPS
WPS function: If you choose Advanced settings > WPS connection on the WLAN of the intelligent
device and press the WPS button on the WiFi converter at the same time, the intelligent device will
quickly connect to the WiFi hotspot of the micro-module.
Col Name
or
Gree Running status
n indicator
Red Alarm indicator
Gree WiFi status
n indicator
Gree WPS mode
Status Description
Steady on The power supply is normal.
Off The power supply is abnormal.
Blinking at The WiFi converter successfully
long intervals registers with the ECC800 and the
software runs properly (the
indicator blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at The WiFi converter fails to register
short intervals with the ECC800 or the
communication is disconnected (the
indicator blinks at 4 Hz, on for
0.125s and then off for 0.125s).
Steady on A system failure alarm is generated.
Off No system alarm is generated.
Steady on The WiFi converter is powered on
but there is no data communication.
Blinking Data communication is in progress.
Off The WPS is normal.
98