Huawei FusionModule5000 Product Description page 89

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
Indicat
or
ALM
RF_Z
Communications Ports
The access actuator provides one DO port (LOCK/GND) and one DI port (GATE/GND).
Table 3-51 lists the LOCK/GND/GATE/GND port pin definitions.
Table 3-51 LOCK/GND/GATE/GND port pin definitions
Item
LOCK/GND
(control
magnetic
locks) pin
sequence
GATE/GND
(door status)
pin sequence
Col
Name
or
Red Alarm indicator
Gree Wireless
n communication
status indicator
Description
LOCK 12V_OUT
GND GND
GATE DI1
GND GND
Status Description
Blinking The indicator blinks at super short
intervals for 0.5s (blinking at 10 Hz,
on for 0.05s and then off for 0.05s)
and then turns off for 0.5s. The
cycle lasts for 10s.
Steady on A system failure alarm is generated.
Off No system alarm is generated.
Steady on No network parameters exist, or a
network is to be created.
Blinking at A network is set up, and no node
long intervals access is allowed (the indicator
blinks at 0.5 Hz, on for 1s and then
off for 1s).
Blinking at A network is set up, and node
super short access is allowed (the indicator
intervals blinks at 10 Hz, on for 0.05s and
then off for 0.05s).
Blinking The access actuator is searching for
intermittently a network (the indicator blinks at
at super short super short intervals for 0.5s and
intervals then turns off for 0.5s).
82