Huawei FusionModule5000 Product Description page 101

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
Specifications
Table 3-61 lists the environment specifications for the rack environment unit.
Table 3-61 Technical specifications for the rack environment unit
Item
Power input
12 V power
output
PoE port
RS485 serial
port
expansion
AI/DI input
Temperature
sensor port
BLINK
button
Indicators
Table 3-62 lists the structural specifications for the rack environment unit.
Table 3-62 Indicator description
Indicat
or
PWR
RUN
Specifications
Phoenix terminal, with input voltage of 36–60 V DC
Two 12 V DC power outputs with the rated output current of 250 mA
⚫ FE communication with the rate of 10/100M
⚫ 36–60 V DC power input
⚫ Four RS485 ports with the default communications rate of 9600 bit/s
⚫
Among the four RS485 ports, two support 12 V DC, 400 mA power
output.
⚫ The other two are isolated, with the default communications rate of
9600 bit/s, and do not support power output.
Two active 12 V DC, 200 mA AI/DI input ports
Provides two RJ45 ports to connect to six temperature sensors, each RJ45
port connecting to three temperature sensors.
Provides a BLINK button.
Col Name
or
Gree Power input
n status indicator
Gree Module
n running status
indicator
Status Description
Steady on The power input is normal.
Off There is no power input.
Off The power is abnormal or the board
program is loading.
Blinking at The software runs properly (the
long intervals indicator blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at PoE communication fails (the
short intervals indicator blinks at 4 Hz, on for
0.125s and then off for 0.125s).
94