Huawei FusionModule5000 Product Description page 76

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
Indicators
Table 3-39 describes the indicators on the ECC800 monitoring module.
Table 3-39 Indicators on the ECC800 monitoring module
Indicat
or
RUN
ALM
3G
RF_Z
Color Name
Green Running status
indicator
Red Alarm indicator
Green 3G status
indicator
Green Communication
status indicator
Status Description
Steady on The power supply is normal, the
program is being loaded, or
WiFi WPS is pairing.
Off The power supply is abnormal.
Blinking at The software runs properly (the
long indicator blinks at 0.5 Hz, on for
intervals 1s and then off for 1s) or the
ECC800 registers with the
NetEco successfully.
Blinking at The ECC800 does not register
short with the NetEco (the indicator
intervals blinks at 4 Hz, on for 0.125s and
then off for 0.125s).
Steady on A system failure alarm is
generated.
Off The system is normal.
Steady on The 3G module is powered on.
Off The 3G module stops running,
or no 3G module is configured.
Blinking at The 3G module succeeds in
long dial-up (the indicator blinks at
intervals 0.5 Hz, on for 1s and then off
for 1s).
Blinking at The 3G module registers with
short the operator network
intervals successfully (the indicator
blinks at 4 Hz, on for 0.125s and
then off for 0.125s).
Steady on No network parameters exist, or
a network is to be created.
Blinking at A network is set up, and no
long node access is allowed (the
intervals indicator blinks at 0.5 Hz, on for
1s and then off for 1s).
69