Advertisement
Figure 3: Mid-mount position
2. Insert two mounting screws, one on either side of the rack.
3. Turn the screws only 3 to four times so you can rest the brackets on them.
Figure 4: Inserting the screws in the rack
4. Place the Communication Manager Branch i120 in the rack so that the slots in the bottom
of the brackets are resting on the screws that protrude.
5. Verify that the screw holes are aligned with the positions of the holes in the rack.
6. Insert two additional mounting screws on each side.
Mount
Issue 3 May 2009
7
Advertisement
