Advertisement
Once the Branch Device Manager loads, you will see one of three screens, according to the
level of configuration you must do.
If this screen opens...
Branch Device Manager main screen
Branch Device Manager Profile-Based
Setup Assistant
Branch Device Manager Initial Setup
Assistant
Branch Device Manager Main screen.
If your Communication Manager Branch i120 arrives fully configured, the Branch Device
Manager Main screen opens
Figure 11: Branch Device Manager Main screen
Figure notes:
1. Navigation Pane
2. Main Menu
The Navigation Pane on the left side of all screens contains a list of links to the screens for
●
managed objects.
The main menu is displayed in the working pane on the right side of the main screen. The
●
entries on the main menu are shortcuts for the most frequently used functions.
Level of configuration to do
None (the Communication Manager Branch
i120 is already fully configured).
Partial (the Communication Manager Branch
i120 is already partially configured).
Complete (the Communication Manager
Branch i120 is unconfigured).
.
1
2
Configure
Issue 3 May 2009
17
Advertisement
