Avaya Aura Communication Manager Branch i120 Installation, Quick Start page 18

Note:
Outside the US, the cord must be VDE Certified or Harmonized (HAR), rated
Note:
250V, 3-conductor (3rd wire ground), 1.0 mm
Configure
Note:
The Communication Manager Branch provides the address of 192.11.13.5/30 via
Note:
DHCP to the local setup computer. Configure your local setup computer to obtain
the IP address automatically or manually set it to 192.11.13.5/30. After the
upgrade is complete you can set your local setup computer to an address on the
same subnet as the Communication Manager Branch.
Note:
Disable any proxy settings in your browser.
Note:
Point your Web browser to https://192.11.13.6.
●
- The Branch Device Manager application starts. This may take several minutes.
Figure 10: Branch Device Manager opening screen
The default user name is administrator
●
The default password is password
●
16 Communication Manager Branch i120 Installation Quick Start
2
minimum conductor size.