Advertisement
!
CAUTION:
The Communication Manager Branch i120 weighs at least 21 pounds (9.6 kg).
CAUTION:
Two people may be needed to mount the Communication Manager Branch i120
in the rack.
You must attach the supplied mounting brackets to the front or the middle of the Communication
Manager Branch i120.
Before you start
Ensure that the rack is bolted to the floor and is earthquake-protected, if required. If the
●
rack is not securely fixed in place, do not continue with the installation.
If you are mounting yourCommunication Manager Branch i120 is in a rack with other
●
equipment already installed, position the Communication Manager Branch i120 to avoid
imbalance.
Brackets without cable guides
You can attach mounting brackets without cable guides to:
Each side of the front of the Communication Manager Branch i120, so that the front of the
●
CMB i120 is flush with the rack.
The middle of each side panel of the Communication Manager Branch i120, so it projects
●
forward from the rack.
Brackets with cable guides
The CMB i120 comes with a third mounting bracket with cable guides to route and support the
cables you connect.
When you front-mount the Communication Manager Branch i120 in a rack, replace one of
●
the standard brackets with the bracket with cable guides.
When you mid-mount the Communication Manager Branch i120 in a rack, attach the
●
bracket with cable guides to the front of the Communication Manager Branch i120.
You can attach the bracket to the left or right side of the Communication Manager Branch i120.
Mount
Issue 3 May 2009
5
Advertisement
