Advertisement
1. If the wall does not have a portion of plywood available, mount a plywood sheet at least
¾ in (1.9 cm) thick and at least 4 x 4 ft (1.2 x 1.2 m) in size, onto the wall. Make sure the
plywood is sufficiently anchored in the wall. Use a minimum of four wood screws and
ensure the screws are driven into wall studs, or use four wall anchors rated not less than
50 pounds (22.5 kg) shear strength each.
Note:
The customer needs to provide and install the plywood backboard.
Note:
2. Mark the plywood with the location of the Communication Manager Branch i120 bracket
screw holes before fastening the plywood to the wall.
3. Position the Communication Manager Branch i120 so that the front panel is facing up, and
secure it to the plywood using a minimum of four screws (pan head at least ¾ in, # 10-12
screw).
Figure 6: Attaching the bracket for wall mounting
Ground
To assure safe installation and operation, carefully read all requirements, recommendations,
and instructions. Pay special attention to all WARNING and DANGER statements.
Ground
Issue 3 May 2009
9
Advertisement
