Installation Diagram - Wilson Electronics WilsonPro ENTERPRISE A8000 Installation Manual

In-building cell signal amplifier with multitower targeting (mtt) technology
Table of Contents

Advertisement

Installation
Diagram
The Enterprise A8000 supports up to four inside antennas and are capable of
operating in traditional Common Mode, in which all amplifier cell bands use the same
outdoor antenna, or Split Mode, in which cell bands use separate outdoor antennas.
Common
Common mode can be used for an installation in which cell towers for different bands
are located in the same direction .
Note: The Enterprise A8000 is configured to common mode by default.
Inside Antenna
Note: A Wilson Lightning Surge Protector is recommended for all building installations. Make sure the
protector is installed outside the building at point of entry connected to a suitable ground and in line
between the Outside Antennas and the Signal Amplifier.
ENTERPRISE A8000 IN-BUILDING CELL SIGNAL AMPLIFIER
Outside Antennas
Inside Antenna
Amplifier
900-2700 MHz
Cell Tower
Inside Antenna
Inside Antenna
5

Advertisement

Table of Contents
loading

Table of Contents