Wilson Electronics WilsonPro ENTERPRISE A8000 Installation Manual page 38

(LOCAL AMPLIFIER CONFIGURATION UTILITY cont.)
Bands can be turned ON/OFF, you can configure Inside Antenna Settings (ON/OFF) and
you can update the Outside Antenna Configuration (COMMON/SPLIT MODE).
Note: Once you make changes to either the Band Enable or Communication Settings,
you must wait at least 30 seconds before power cycling the unit or the new settings
will not be stored.
You can navigate through the site by clicking on the Settings, Status
and Antenna Tuner icons located on the left then selecting AMPLIFIER,
COMMUNICATIONS or SYSTEM.
ENTERPRISE A8000 IN-BUILDING CELL SIGNAL AMPLIFIER
AMPLIFIER COMMUNICATIONS SYSTEM
35