Table of Contents
Advertisement
Quick Links
Installation Guide
AMPS
iDEN
DUAL BAND
DIRECT
DIRECT
DIRECT
CONNECTION
CONNECTION
CONNECTION
AMPLIFIER
AMPLIFIER
AMPLIFIER
Part# 811101
Part# 814001
Part# 811201
FCC ID: PWO824D
FCC ID: PWO806D
FCC ID: PWO819D
IC: 4726A-824D
IC: 4726A-806D
IC: 4726A-819D
Wilson Electronics, Inc.
3301 E. Deseret Drive, St. George, Utah 84790
For additional technical support go to
www.wilsonelectronics.com
Phone: 1-866-294-1660
Fax: 1-435-656-2432
The term "IC:" before the radio certification number only signifies
that Industry of Canada technical specifications were met.
Advertisement
Table of Contents
Related Manuals for Wilson Electronics 814001
Summary of Contents for Wilson Electronics 814001
-
Page 1: Installation Guide
DIRECT DIRECT CONNECTION CONNECTION CONNECTION AMPLIFIER AMPLIFIER AMPLIFIER Part# 811101 Part# 814001 Part# 811201 FCC ID: PWO824D FCC ID: PWO806D FCC ID: PWO819D IC: 4726A-824D IC: 4726A-806D IC: 4726A-819D Wilson Electronics, Inc. 3301 E. Deseret Drive, St. George, Utah 84790 For additional technical support go to www.wilsonelectronics.com... -
Page 2: Package Contents
AMPLIFIED and transmitted to the cell site through the outside antenna. When using 1900MHz (PCS) the signal bypasses the amplifier’s circuitry while getting full benefit from the outside antenna. NOTE: Amplifier #814001 does not have a 1900MHz (PCS) bypass as iDEN (Nextel) does not utilize this frequency. - Page 3 4. AMPLIFIER INSTALLATION (see illustration on pg.4) 4.1 Installing the Antenna Wilson Cellular 4.1.1 See antenna packaging for model specific instructions. WARNING: Verify that both the outside antenna and adapter extension cable are con- nected before powering up the AMPLIFIER. RF SAFETY WARNING: (MOBILE ONLY) The outside antenna must be mounted with a separation distance of at least 15.5 inches from any of the vehicle...
- Page 4 In-Building Installation ������� ������� �������� ���� ������� ����� ���� ���� ������� ������� �� ��������� ���������� ����� ���� ����������� ����� ��������� ���������� Mobile Installation ������� ���� ������� ���� ���� ��������� ��������� �� � �� ����� ������� ��������� ������� ���� ���������� ���������...
-
Page 5: Amplifier Specifications
The information provided by Wilson Electronics, Inc. is believed to be complete and accurate. However, no responsibility is assumed by Wilson Electronics, Inc. for any business or personal losses arising from its use, or for any infringements of patents or other rights of third parties that may result from its use. -
Page 6: Optional Accessories
6. OPTIONAL ACCESSORIES/ANTENNA OPTIONS 6.1 Coax Cable Extensions 50Ω (see chart on pg.7) 6.2 Antenna Options (see chart on last page) 6.3 N-Female To FME-Female Adapter - Adapts 9913 Coax to the 814001 Bi-directional Amplifier. 6.4 Lightning Suppressor (In-Building application) WARNING: Lightning protection is recommended for all In-Building installations. -
Page 7: Tech Support
8. TECH SUPPORT If you need further assistance with your installation: 1) Call us Toll-Free at 866-294-1660 2) E-mail tech support at tech@wilsonelectronics.com 3) Go to www.wilsonelectronics.com Our Hours of Operation are: 8:00 AM – 4:30 PM (Mountain Time) EXTENSION CABLE CHART (RG 58 - FME connectors / 9913 - N connectors) 951101 5’... - Page 8 Outside Antenna Options For more options visit www.wilsonelectronics.com ���� ����������� ������������ ��� ��������� ����� Pictures Are Not To Scale Not All Outside Antenna Options Are Shown Questions? 1-866-294-1660 www.wilsonelectronics.com ������ ��� ����� ������� ���� ������ ���� ����� ����� ����� ����� ������...