Cut Out Dimensions; Mounting The Cabinet; Reassembling The Mounting Plate - Autronica AUTRO SAFE Self Verify BS-310 Installation Handbook

Fire alarm control panel. controller

Hide thumbs Also See for AUTRO SAFE Self Verify BS-310:

Table of Contents

All manuals and user guides at all-guides.com

Mounting

1.12.4 Cut Out Dimensions

The illustration below shows the cabinet's cut out dimensions. The

dimensions given include space for the cover frame, but not for the

required free space of minimum 50 mm on the top / bottom of the

cabinet.

The cabinet has 4 mounting holes located on the left and right flange.

Consult the illustration above, and do the following:

 Mark and drill all the holes according to the illustration.

 Place the cabinet into the wall and fasten the 4 screws.

 Reassemble the mounting plate carefully into its position inside the

 Tighten the screws.

Installation Handbook, AutroSafe Interactive Fire Alarm System, Release 3, 116-P-ASAFE-FA/DE,

cabinet.

Rev. J, 2011-12-06,

Autronica Fire and Security AS

Table of Contents

Do you have a question about the AUTRO SAFE Self Verify BS-310 and is the answer not in the manual?

Autro safe self verify bs-320 Autro safe self verify bc-320