Mounting The Batteries; Reassembling The Front Panel - Autronica AUTRO SAFE Self Verify BS-310 Installation Handbook

All manuals and user guides at all-guides.com
Mounting

1.11.5 Mounting the Batteries

 Unscrew the screw as shown on the illustration below.
 Lift the lower part of the cover off the bottom slot and remove the
 Place the batteries in their position as shown, then reassemble the

1.11.6 Reassembling the Front Panel

 When all the necessary cable connections are done, reassemble
 Open the front panel.
 Tighten the 4 wing nuts on the right and left side inside the cabinet.
 Interconnect the ribbon cable(s) between the front panel and the
 Close the front panel, and tighten the two lock screws on the top
Installation Handbook, AutroSafe Interactive Fire Alarm System, Release 3, 116-P-ASAFE-FA/DE,
battery cover.
Battery Cover
battery cover.
the front panel.
cabinet.
and the bottom on the right hand side.
Rev. J, 2011-12-06,
Autronica Fire and Security AS
Screw
Batteries;
2x12V / 12Ah