Dimension Drawings - Siemens SIMOTICS M-1PH3 Manual

Technical data and characteristics
12.1 SIMOTICS M-1PH3 main motors
12.1.2

Dimension drawings

DT Configurator
The Drive Technology (DT) Configurator supports you for the following operations:
• Quickly and simply configuring drive components by using the following methods:
– Using product group preselectors
– Using targeted navigation through selection menus
– Entering article numbers directly
• Selecting products starting from the following quick selection elements:
– Gearboxes
– Motors
– Drives
– Associated options and components
– Control systems
– Software licenses
– Connection systems
• Viewing and downloading the following comprehensive documentation:
– Technical data sheets
– Operating instructions
– Certificates
– 2D/3D dimension drawings
• Supporting retrofit projects
• Transferring a part list into Industry Mall for online ordering
You can find further information on the Internet at the following link:
DT Configurator (http://www.siemens.com/dtconfigurator)
Recency of dimension drawings
Note
Changing motor dimensions
Siemens AG reserves the right to change the dimensions of the motors as part of mechanical
design improvements without prior notice. This means that dimension drawings can become
out of date. Up-to-date dimension drawings can be requested without any charge from your
local SIEMENS office.
124
Equipment Manual, 01/2021, A5E43087278-004
1PH3 main motors