Table of Contents
Advertisement
Maintenance
Risk of injury through contact with cleaning agents and solvents
Contact with cleaning agents and solvents can cause chemical burns and irritate the skin
and mucous membranes.
• Carefully observe all of the safety and application notes provided on the packaging of the
• Ensure that any vapors that are released are drawn out and that the work area is well
• Use the appropriate personnel protection equipment (for example, protective eyewear,
Injuries caused by blown particles
When you clean the motor using compressed air, this can stir up dusts, metal chips and
cleaning agents, which can cause injury.
• When cleaning the motor with compressed air, ensure there is adequate extraction
• Use the appropriate personal protection equipment, for example, gloves, protective
10.1
General inspection guidelines
The motor is not disassembled for inspection.
If you have any questions, please contact the manufacturer, informing them of the machine
type and serial number.
We recommend that a Siemens Service Center carries out inspection and maintenance work.
The contact data is provided in Section "Technical support" in Chapter "Introduction (Page 3)".
1PH3 main motors
Equipment Manual, 01/2021, A5E43087278-004
CAUTION
cleaning agents and solvents.
ventilated.
gloves, respiration filter).
CAUTION
equipment.
overall.
10
113
Advertisement
Table of Contents
