Dimension Drawings; Siemens Product Configurator - Siemens SIMOTICS M 1PH8 Configuration Manual

Dimension drawings

10.1 SIEMENS Product Configurator
The SIEMENS Product Configurator supports you when configuring your drive.
You will find the following quickly and easily in the SIEMENS Product Configurator
• Technical data
• Characteristics
• dimension drawings
• 2D/3D CAD data
The SIEMENS Product Configurator supports you when creating system documentation
regarding project-specific information.
Note
The 3D model in the SIEMENS Product Configurator is a simplified representation that does not
show every detail.
You can find further information on the Internet at SIEMENS Product Configurator
(www.siemens.com/SPC):
Recency of dimensional drawings
Note
Changing motor dimensions
Siemens reserves the right to change the dimensions of the motors as part of mechanical design
improvements without prior notice. This means that dimensional drawings can become out of
date.
You can request free of charge current dimension drawings from Technical Support or your
local sales partner.
1PH8 SIMOTICS M main motors
Configuration Manual, 12/2022, A5E51895839A
10
257